This popular stringed instrument is made up of many different banjo parts. The pot, or body, of the banjo is made up of a rim, tone ring, tension hoop, and head. Coordinator rods or a dowel stick connect this to the neck. Between four and six strings run the length of the banjo’s neck, all of which are connected to planetary gear turners, or tuning pegs.
The majority of banjo parts can be found in the instrument’s pot. Hooks and nuts hold a wood or metal rim, a tone ring, a tension hoop, and a head together. The head of a banjo made before 1950 is usually made of animal skin, such as calf skin, but most heads made after 1950 are made of plastic.
To amplify the sound, some banjos have a resonator plate on the back side of the pot. Because a five-string resonator banjo is required for almost all bluegrass music, this detail can be extremely important to some musicians. Open-back banjos are instruments without a resonator plate.
The neck is the biggest part of the banjo. Within the pot, one to two coordinator rods or a dowel stick keep the neck in place. A fingerboard is the part of the banjoist’s neck where the strings are pressed. The player can see and feel the proper place to push down on most fingerboards, which are small metal pieces on the neck.
Metal, nylon, or gut strings are connected to tuning pegs or planetary gear turners at the top of the neck, or peghead, and a tailpiece at the bottom of the pot. The strings are supported by the bridge, which is supported by the head. This bridge amplifies the sound by transferring the vibrations in the strings to the head. While picking the strings, the player’s arm is kept from touching the head by a metal or wood armrest.
Depending on the player and the music genre, banjos can have anywhere from four to six strings. The four-string tenor banjo is frequently used in Irish and Dixieland jazz music. The five-string banjo is used in both bluegrass and old-time American music. Various six-string banjos, such as the banjitar, are less common and are used in some jazz, blues, and country bands.
Banjo parts such as picks and capos are important for most banjoists, despite the fact that they are not connected to the instrument itself. Regular picks, like those used on a guitar, are used by some players, while finger picks, which are clipped on to the thumb and first two fingers, are used by others. To play in a different key, a capo is used. A fifth string capo is required because the last string on a five-string guitar is shorter than the others.