A dual flush conversion allows you to conserve water by choosing different flush options for solids and liquids. In order to do a dual flush conversion on an existing toilet, you will need to turn off the water supply and disconnect the water hose. Next, remove the existing flush handle and replace it with the dual flush unit. Then, remove and discard the existing flush mechanisms and install the new components. After securing all of the new hardware, reconnect the supply hose and turn the water back on to complete the dual flush conversion.
In most cases, a dual flush conversion is a relatively simple, do-it-yourself project that requires a few basic hand tools such as pliers and wrenches. To begin the conversion process, turn off the water supply at the small valve below the toilet. Place a small container or towel beneath the work area to collect any water drips. Next, disconnect the water supply hose at the toilet tank using the appropriate-sized wrench. Carefully remove the water supply hose from the toilet tank and move it aside.
Next, remove the top of the toilet tank to expose the flu handle and flusher valve. Remove and discard the existing flush handle from the toilet tank by loosening the large hex nut. An adjustable wrench can be used for this step if an appropriate-sized wrench is unavailable. Use caution when loosening this nut to avoid damaging the delicate porcelain tank material. Install the new dual flush conversion button according to the manufacturer’s directions.
Locate the existing flush-valve assembly and lift it out of the toilet tank. If the flush-valve is equipped with a ball-cock float, it must also be removed. Disconnect the small plastic fill-hose and remove it from the toilet tank. Next, locate and remove the toilet tank flapper and the attached chain. Install the new dual flush conversion valve and flapper assembly according to the manufacturer’s directions.
It is important to make certain that you have installed all of the new dual flush conversion hardware according to the manufacturer’s directions before reconnecting the water supply. Check all fittings, seals, hoses, and cables to ensure that they are positioned correctly. Then, carefully reconnect the water supply hose with the appropriate-sized wrench. Turn on the water supply to the new dual flush conversion valve and check for water leaks. Flush the toilet several times to ensure proper function and to release any trapped air in the system.